Modern pendant lighting is a great way to focus lighting in a particular area. Pendant light fixtures hang down from the ceiling, which is one of the reasons they are so popular. Whichever method is used to suspend light is as easy as the hose or wire is used to suspend it from the ceiling to the desired length of cut adjust the length. It still remains true when you install a pendant light fixture in a suspended ceiling. The method used to install the existing stand on your suspended ceiling determines the difficulty when installing pendant light in its place.
Installation hanging modern pendant lighting, find the breaker in the electrical panel that controls the power of electricity to the lamp. Switch to off position. Place stairs under the existing light fixture. Remove the cover of the existing light fixture and remove the bulb. Remove the screws that connect the luminaire to the terminal box and disconnect the wires. Be aware of the method used to mount the box for suspended ceiling by removing the ceiling tile next to the lamp. Hang one bob from the ceiling until it is directly above the junction box and mark the ceiling. Drill a pilot hole on this brand in a threaded loft hook.
Cut a section of swing frame with tin clippings to reach from the hook to the clamp box. Hook one end of the chain to the ceiling hook and the other end to the terminal box with a screw and a washing machine. Pull the electric wires from modern pendant lighting through the hose and top cover (canopy) if necessary. Connect the wires according to the pendant light manufacturer’s instructions.