Cooper lighting Industries has a complete range fixtures all equipped with the necessary accessories for a professional installation. These fixtures use a wide range of bulbs from LED to halogen. ideas for install cooper lighting, clear the clips for the ceiling. Switching the breaker gives electricity to the fixture the location to the switched off position. Locate the spring clips on the housing. Point them so that they point to the center of the opening in the house. The tab of the clip will be in the holes in the house when the device is installed.
Attach the socket. Pull the socket lid. Aim the cover with the housing and click on the spot. Fit the fixture cooper lighting. Place the stairway under the roof opening for the fixture. Center unit with the opening in the ceiling and push straight up. Be careful not to twist or tilt the fixture so that the spring clips fit and hold the fixture in place. Switch on the switch again.
Then for install cooper lighting, disable the four springs. Switching the breaker gives electricity to the fixture the location to the switched off position. Find out the four springs on the house. Rotate them away from the opening in the housing as they will not be used in this installation. Attach the outlet adapter. Grab the cow on the fixture, pull it straight out and set it aside for now. Unscrew the outlet adapter into the socket cover and attach the socket cover to the trim. Install the luminaries.